User manual

12
CONTROL PANEL FUNCTIONS
ON/OFF( POWER ) BUTTON
Starts or stops the unit.
MODE BUTTON
Press to select the operating mode:
Fan Mode
Air Conditioning Mode
Heating Mode
Dehumidifying Mode
Auto Mode
FAN BUTTON
Press to select the fan speed: High, Medium, and Low.
The fan speed can be visually distinguished by the number of the digital air segments (follow arrow above) flow
out from the windmill fan image on the multi-colour display.
TEMPERATURE
When in cooling or heating mode, the desired temperature can be selected by pressing the ∧ and ∨ buttons. The
multi-colour display flashes the temperature while it is being set. The multi-colour display shows the set
temperature when it is not in temperature setting mode.
The multi-colour display can show either Celsius or Fahrenheit. Press the ∧ and ∨ buttons simultaneously to
change the display from Celsius to Fahrenheit or vice versa.
TIMER
To set the auto start time, press the Timer on button until the multi-colour display shows a flashing “ ”.
Press the ∧ and ∨ buttons to change the clock to the desired time for the unit to automatically start. To set the
auto stop time, press the Timer Off button and the multi-colour display will show a flashing “ ”. Press
the ∧ and ∨ buttons to change the clock to the desired time for the unit to automatically stop. The light will flash
for 3 seconds to activate the timer you programmed.
TIME DISPLAY
In the diagram above, the letter “J” points to the adjustable time display. To adjust the time, Press FAN, SPEED
and SWING together (at the same time), then press UP to adjust the hours, and press DOWN to adjust the
minutes.
SWING
To start horizontal oscillation, press the Swing button once. ‘ or ’ icon will appear on the multi-colour
display. To stop oscillation, press the Swing button again. Vertical air flow direction can be adjusted manually.
TEMPERATURE DIAL (PAC18)
When in cooling or heating mode, the desired temperature can be selected by turn left and turn right buttons. The
multi-colour display flashes the temperature while it is being set. The multi-colour display shows the set
temperature when it is not in temperature setting mode.
The multi-colour display can show either Celsius or Fahrenheit. Turn left and turn right buttons simultaneously to
change the display from Celsius to Fahrenheit or vice versa.
TIMER DIAL (PAC18)
When the unit is not working turn down dial to set the auto start time, until the multi-colour display shows a
flashing “ ”. when the unit is working turn down dial to set the auto stop time, press the Timer Off button
and the multi-colour display will show a flashing “ ”. Turn left and turn right buttons to change the
clock to the desired time for the unit to automatically stop. The light will flash for 3 seconds to activate the timer
you programmed.