Owner`s manual

Page 4 Chapter 2 - Assembly and Setup
The Hardware Kit for the CM1000 (part# 71100) contains:
Description Qty Part Number Item #
5/16” x 2” Screw 4 41011 8
5/16” x 2.25” Screw 3 41050 9
5/16” Split Washer 7 43042 10
5/16” Nyloc Nut 3 42033 11
5/16” x 2.5” Button Cap Screw 2 41138 --
Bracket, Handrail Clamp 1 52078 12
#10 x 3/4” Phillips-head Screw 9 41009 --
The console and related materials for the ClimbMax 1000 are packed in the Configuration Kit
included with the unit. This box contains:
Description Qty Part Number
Warranty Card 1 03006
Owner’s Manual 1 03070
Service Manual 1 03071
Power Cord 1 Varies with country (14007 for USA)
ClimbMax Display Console 1 Varies with language
Assembling the ClimbMax 1000
Attach the Feet to the Base
Carefully turn the base (1) upside down. Attach the left (2) and right (3) feet using three of the
5/16” by 2.25” screws (9) and washers (10), and one 5/16” nut (11). Attach the front foot using
two of the 5/16” by 2” screws (8) and washers (10). See Figure 1. Roll the base onto its feet.
Figure 1 - Attaching the Feet