Installation & Assembly

9
Attach casters.
STEP 5
*Please note location of predrilled holes on each part.
Align two casters without brakes (G) with the lower holes on the bottom panel (E). Use a #3 Phillips screwdriver to
secure the casters to the unit using eight ST6.3 x 12 mm. screws (AA).
Align two casters with brakes (H) with the upper holes on the bottom panel (E). Use a #3 Phillips screwdriver to
secure the casters to the unit using eight ST6.3 x 12 mm. screws (AA).
G
H
x 16
AA
#3 Phillips