Owner`s manual

MODEL CMA-180VL INSTALLATION & OPERATION Rev. 2.00 Page

4. A 7/8” chemical probe hole is provided in the front of the wash tank heater just

below hi limit switch. Insert the probe into the hole from inside the wash tank and

secure it with the probe retaining nut provided. Connect ring connectors to the

probe with nuts and star washers provided.

5. The final step of installing the CMA supplied Detergent and Rinse Dispenser is

programming it to your specific application. The reference manual supplied with

the dispenser shows you how to program it.

 Keep in mind while reading the reference manual that the CMA-180VL

operates in “probe” mode. (This mode is selected by setting a value of “1” in

screen 21).

 Screen 22 must be set to “1” (Door).

There are four user functions with this dispenser. Their operation is described in the

reference manual.