Troubleshooting guide
15
After Each Meal Period or every 8 Hours of Operation.
1. Press the lighted power switch to the OFF position. The power switch light will go out.
2. Open the door and remove the overow tube from the wash tank sump.
3. Inspect and clean the overow tube rubber seal
4. Close the door.
5. Push and hold the drain switch until all of the water has drained.
6. Remove the sump lter carefully to keep the soil or waste particles from falling into the sump.
7. Clean the sump lter by rinsing with clean water.
Be sure to back-ush the lter.
Do not strike the lter against solid objects.
8. Check the sump for foreign material and clean as required.
9. Replace sump ter and the overow tube.
10. Make sure that spray arms turn freely.
11. Check the chemical containers and rell as required.
12. Close the door and turn the ON/OFF switch to ON and return to normal operation mode.
Cleaning and Maintenance
Cleaning
Sump
Sump
Filter
Overflow
Seal
Overflow
Tube
Heating
Element