Specification Sheet

Summary Specifications: Models L-1X / L-1X16
CMA Energy Mizer models L-1X and L-1X16 low temperature undercounter chemical sanitizing commercial dishwashers meets NSF,
UL and CUL sanitation and construction standards WITHOUT the use of BOOSTER or TANK HEATERS. The models L-1X and
L-1X16 is constructed entirely of stainless steel. Each unit automatically washes, rinses and sanitizes food service utensils in
standard 19-3/4"X19-3/4" racks. Units comes standard with upper and lower stainless steel wash arms. The L-1X and L-1X16
incorporates a pump purging system that improves results by eliminating soil and chemical carryover during rinse cycle.
OPERATING CAPACITY
RACKS PER HOUR
(NSF RATED) 30 30
OPERATING CYCLE
WASH TIME-SEC 58 58
RINSE TIME-SEC 32 32
DWELL/PURGE-SEC 30 30
TOTAL CYCLE TIME 120 120
WASH TANK CAPACITY 1.7 GAL. (6.49 L)
WASH PUMP CAPACITY 35 GPM (132.5 LPM)
OPERATING TEMPERATURE
REQUIRED 120°F (49°C)
RECOMMENDED 140°F (60°C)
WATER CONSUMPTION
PER RACK 1.7 GAL. (6.44 L)
PER HOUR 40.8 GAL. (154.4 L)
WATER INLET 1/2" (1.27 cm)
DRAIN 1" (2.54 cm)
WASH PUMP MOTORS HP 11
DIMENSIONS
DEPTH 23-1/2" (59cm)
WIDTH 24-1/4" (61.6cm)
HEIGHT 33-1/4"-34-1/4" (L-1X16) (84-86 cm)
HEIGHT 30"-31" (L-1X) (76.2-78.2 cm)
MAXIMUM CLEARANCE
HEIGHT FOR DISHES 16" (L-1X16) (40.64cm)
MAXIMUM CLEARANCE
HEIGHT FOR DISHES 12-1/8" (L-1X) (31cm
)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS AMPS
115 16
SHIPPING WEIGHT
APPROXIMATE 196# (88kg)
UNDERCOUNTER DISHWASHER L-1X/L-1X16 METRIC
USA METRIC
Specifications:
DISHMACHINES
24-1/4"
33-1/4"
34-1/4"
DISHMACHINES
24"
30"
16"
42"
23-1/2"
1-1/2" Minimum
Clearance
18-1/2"
E
lectrical
Hook-Up
1" Drain
1/2"
Water
Inlet
FRONT
VIEW
L-1X16
L-1X
REAR
VIEW
L-1X16
LEFT VIEW
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10110.00 © 1-2016 CMA, Inc.
Chemical Sanitizing
Undercounter
Dishwasher
L-1X / L-1X16
23-1/2"
12-1/8"
1-1/2" Minimum
Clearance
15"
L-1X
LEFT VIEW
38-1/2"
DISHMACHINES
CMA
®
Registered Trademark
34"
Adj
35"
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
WARNINGS:
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
L-1X Spec Sheet Back Combined 4-2015 /REV 1-2016_L-1X16 Spec Back 1/11/16 9:33 AM Page 1