Troubleshooting guide
21
GLOSSARY OF TERMS
AIR CONTROL: Mounted generally on the lip of the spa, it
induces warm air from the equipment enclosure into the jet
stream through venturi action.
AIR RELIEF VALVE: Located on top of dome lter lid. Used to
release air on a pressure lter (Cascade model only).
BLEEDER VALVE:Locatedonthewetendofpump#1and
pump#2.Usedforreleasingairfromthepumpingsystem.
COAST ZONE OZONATOR: Available as an option. The ozon-
ator produces natural ozone through Corona Discharge. Con-
tinuous use of an ozonator can dramatically reduce sanitizer
consumption.
CHECK VALVE: To prevent water back ow into ozonator.
CONTROL BOX: Basically the “heart” of the spa. Power is dis-
tributed to any/all functions of the spa: pumps, ozonators,
LED lighting, heater element, etc.
CONTROL PANEL: Mounted on the top lip of the spa and
controls the functions of the spa.
DRAIN VALVE: Used in draining of the spa. Normally located
in the lower left hand corner of the spa skirt.
EQUIPMENT ENCLOSURE: An enclosure that houses the con-
trol box, pump(s) and other electrical components.
FILTER: The lter cleans the spa by passing water through a
lter cartridge where debris and impurities are removed. Top
load lter means the lter cartridge is accessible through the
top of the spa. Front access skimmer means cartridge is ac-
cessed through door of skimmer.
FLOATING REMOTE: A remote control that controls spa func-
tions as well as the DVD player and the Sony radio/CD. The
unique design allows it to oat on the water surface.
FLOOR DRAIN: The oor drain is covered by a grate-type
cover and is utilised when draining the spa. It also acts as the
returnfortheozonator.Youwillseebubblesemittedfrom
this drain, which is the result of water mixing with the ozone
output.
GATE VALVES: Red with a grey handle is located at the in-
let and outlet of the pumping system. Used while servicing
the spa equipment, the valves open or close the water ow
to the equipment. To remain open for normal use, turn fully
counterclockwise.
HEATER: The thermostatically controlled heater raises the
temperature of the spa to the desired setting.
JETS:
LAMINAR FLOW JET: A thin stream of water that arcs
from the spa lip. May be backlit by Fiber Optic or LED.
MASTER MASSAGE JET: A large-aperture jet with multiple
nozzles to massage many muscle groups simultaneously.
NECK JET: Direction-controllable jet for soothing
neck massage.
TRILLIUM ADJUSTABLE CLUSTER JET: Our adjustable,
high-intensity hydrotherapy jet.
TRILLIUM ORBITAL JET: Provides a uni-directional circular
therapeutic massage.
TRILLIUMGATLINPOLYJET:Deliversmassageinstac-cato
bursts over a wide area, like a professional masseuse.
TRILLIUMPOLYORBITALJET:Providesauni-directional
circular therapeutic massage.
TRILLIUMPOLYDIRECTIONALJET:Providesastraight
ow for a therapeutic massage.
TRILLIUM DIRECTIONAL JET: Provides a straight ow for a
therapeutic massage.
TRILLIUM FIBER OPTIC JET: Exclusive to Coast, it adds a
splash of color to hydrotherapy sessions.
TRILLIUM VOLCANO/WHIRLPOOL JET: high-output jet on
spa oor designed for foot and leg massage.
TRILLIUM GATLIN JET: Delivers massage in staccato
bursts over a narrow, focused area.
TRILLIUM PULSATING JET: Provides a uni-directional cir-
cular therapeutic massage.
KNIFE VALVES: A white “T”-handled valve, same functions as
Gate valve (see above), except to open pull up on handle.
LEDs: LEDs and their special lenses can be used to achieve the
desired mood lighting in the spa and spa jets.
SKIMMER: This is the rectangular outlet at the water level.
The skimmer removes surface debris to the lter. The water
level in the spa should be kept at the center of the skimmer
for optimum operation.
SUCTION FITTING: During operation of the equipment, the
suction works in conjunction with the skimmer to draw wa-
ter from the bottom of the spa through the lter, keeping the
spa sparkling clean.
WATER DIVERTER VALVE (2 sizes): The large diverter is used
to divert water to various seats in the spa. The smaller diverter is
used to divert water to the neck jets and/or waterfalls. Turn han-
dle only when pump is on low speed.