Contents Profile 1 Overview 1 Product Package Contents 1 System Requirements 1 To know Digital Camera 1 Install Battery 2 Software Installation 3 Taking Photos 4 Camera Functions Control 5 Download Photos 7 PC Camera Functions 9 Browse Live 9 Video Conference 10 Appendix1: Specifications 11 Appendix2: Answers of frequent asked 11 “PhotoImpression and Funhouse” User’s Manual 14 -0-
1 Profile Overview Thank you for purchasing the digital camera. It not only can take photos but also has the built-in PC camera functions. This camera is equipped with 8MB SDRAM: if you want the photos in the camera to be downloaded to your computer, you are only required to connect the USB cable to your computer and your camera; It is also possible to use the built-in PC camera to hold a video conference via the internet, enabling you to have a face to face online conversation with others.
G. H. I. J. K. L. Delete Button Function Button Battery Box Flash Lamp Lens USB Port Install Battery 1 1.Open the battery box. 2. Load the batteries correctly: when you load the batteries, please place two AA battery according to the pole directions for batteries on the battery box. 3.Close the battery box cover. Note: 1.
Warning 1. Don’t open the battery box at will, and the power cut will cause the photos in the camera missing. 2. If you don’t use the camera for a long time, please take out of the batteries for fear of the discharging or corrosion of the batteries. 3. Please don’t put the battery into fire for fear of explosion to cause. Automatically enter the energy saving status In order to save the energies of batteries, if the camera is not used in 60s, the camera will auto enter into the energy saving status.
Note: For detailed instruction on PhotoImpression and Funhouse software, please refer to separate instructions enclosed. If the auto installation fails, you must install them manually. 1. Place the DRIVER DISK CD into the CD-ROM driver 2. Enter E:\autorun.exe (If E is your CD-ROM letter) 3. Follow the directions of the installation wizard. Taking photos 1 Please be sure batteries installed are fresh before using the camera to take photos. 1. Load the batteries.
Camera Functions Control 1 Turn on Press and hold down the Start/Shutter Button for 5 seconds to turn on. When connecting to a computer using a USB cable, the camera will power on automatically. Using the Flash Push the flash lamp button to the side close to “ ”, the flash lamp will start to be recharged and the indicator will be light up. The flash lamp will be light up when it fully recharged. The flash lamp will work if you press shutter. Continuous shoot 1.
2. Press the Shutter Button once within 5 seconds to delete all the photos stored in the camera. Note: If you don’t press shutter button within 5s,the operation of deleting the photos in camera will not be executed, and the camera will return to the normal working state. Photo Resolution Selection Note: The resolution status will always show on the LCD display in small character. 1. Press “Function button” to select “Hi” or “Lo” character show on LCD. 2.
Nota: Download Photos 1 When your photo memory if is at capacity, you may transmit them into your computer for viewing storage. Meanwhile, you could use “PhotoImpression 4” to edit/print photos. 1.Plug the other end of the USB cable into a USB port on your computer. When you heard the buzzer beeps once means USB cable connected well. 2. Double-click the “PhotoImpression4” icon that is on your desktop. This will launch the “PhotoImpressionTM 4” program. 1.
4.This will start the image acquisition, and will display the picture as a thumbnail in the photo holder. 5.Selected the photo you want and click “OK” to magnify it.
PC Camera Functions 1 Browse Live 1. Please select (PhotoImpression 4) in the program library of VGA Dual Camera. 2. Click [video camera] , and the dialog box [capture the images from video camera] will automatically pop-up. 3. Functions Introduction (1). SourcesYou can set the Brightness. Contrast---- device origin, device set and camera control; and please select (Default). (2). FormatYou can adjust the resolution and the color mode of images; the color mode is suggested to select [RGB-24]. (3).
(4). CaptureWhen you play live videos, click and select this function to acquire the single picture and store it in the album. (5). Done Finish the PC Camera Functions Video Conference The camera can be used as a PC camera to conduct image transmission or hold online Video conferences, you are only required to: 1. Use the USB cable to connect the camera and PC 2. Run the video conference software Microsoft Net Meeting on your computer. 3. Input others’ IP address in the address bar and dial 4.
Appendix1: Specifications 1 Product Type: Digital Camera Electronic Coupling Element: CMOS Sensor 300K Pixels Image Resolution: 1280*960 Pixels (SXGA) 640*480 Pixels (VGA) Memory Device: Built-in Memory Capacity: 26 pieces (VGA) 104 pieces (QVGA) Viewfinder: Built-in Shutter Speed: 1/6-1/15000 seconds Shoot Mode: Single/ Continuous /PC Camera Image Process: Automatic Exposure / Automatic White Balance Working Voltage: AA1.5V * 2/USB 5V Transmission Interface: USB 1.
2 Select [Action] [Scan for hardware changes] If your O/S (operation system) is Win 98 Se or Win Me 3 Press right key/[Refresh] Apretar right key/[Refresh] 2. Q: The camera can’t work after connection, there’s a yellow mark “!” Showing at Device Manager/Imaging devices/VGA Dual Camera. A: Due to the collision of the computer’s peripheral please follow below steps: (1) Select VGA Dual Camera.
4. Q: Can I connect the camera to the compute when I install the driver? Puedo conectar la camara al computador cuando yo instalo el arranque?? A: No, please do not connect your camera to computer while you are install driver. 5. Q: Why my camera has no response when I press Mode key or shutter. A: Please take battery out and reload it. 6. Q: There is color spots/ stripes layers and segments when I download my photos.
“PhotoImpression and Funhouse” User’s Manual Please follow the four steps below to browse “PhotoImpression and Funhouse” User’s Manual attached in the CD. 1.Double-click “My Computer” icon . 2.Open CD-ROM. 3. Open loose-leaf folder “user’s manual” in the main screen of CD-ROM. 4. You can browse “PhotoImpression” or “Funhouse” User’s Manual as you wants. Note: “PhotoImpression” and “Funhouse” User’s Manuals are read by Acrobat. If you cannot read them, please install Acrobat in your computer firstly.