User`s guide

Adept Cobra PLC600/PLC800 Robot User’s Guide, Rev C 37
Equipment Installation 3
3.1 Transport and Storage
This equipment must be shipped and stored in a temperature-controlled environment,
within the range –25°C to +55°C. The recommended humidity range is 5 to 90 percent,
non-condensing. It should be shipped and stored in the Adept-supplied packaging, which
is designed to prevent damage from normal shock and vibration. You should protect the
package from excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport and store the packaged equipment
(see Figure 3-1).
The robots must always be stored and shipped in an upright position in a clean, dry area
that is free from condensation. Do not lay the crate on its side or any other position: this
could damage the robot.
The PLC600 robot weighs 41 kg (90 lb) and the PLC800 weighs 43 kg (95 lb) with no
options installed.
Figure 3-1. Cobra PLC600/PLC800 Robot on a Transportation Pallet
Eyebolt for lifting robot
after robot has been
unbolted from the
transportation pallet.
Place forklift or pallet-jack here.