User`s guide

Adept Cobra PLC600/PLC800 Robot User’s Guide, Rev C 43
Mounting the PLC Server
The following mounting options are available for the PLC Server:
• Rack
•Panel
•Table
In addition, the PLC Server can be stack mounted (one unit placed on top of another). See
the sections below for information on mounting the PLC Server; page 93 for information
on mounting the sDIO.
NOTE: To maintain compliance with EN 60204 in European installations,
the mounting of the PLC Server and all terminations at the PLC Server
must be performed in accordance with this standard.
Rack Mounting the PLC Server
To rack mount the PLC Server in a standard 19-inch equipment rack, install the optional
mounting brackets on the side of the PLC Server, as shown in Figure 3-3. These brackets
must be ordered separately, they do not come with the PLC Server.
Figure 3-3. Rack Mounting the PLC Server
2X 25.0
88.1
3.6
TYP.
14.2
R 3.6
3X M3 x 6MM
BOTH SIDES
3.8
19.1
2X 40356-00004
462.0
21.8
44.4
482.8
190.0