User`s guide

46 Adept Cobra PLC600/PLC800 Robot User’s Guide, Rev C
Installing CompactFlash
To install a CompactFlash (CF) into a PLC Server:
1. Make sure that the PLC Server is disconnected from its power source.
2. Locate the CF compartment (see Figure 3-6).
Figure 3-6. CompactFlash Memory Card Compartment
3. Carefully remove the CF from its shipping container. Locate the CF slot and
position the card so its connector is facing towards the PLC Server and the label is
facing up.
4. Insert the CF into the PLC Server.
Once installed, Adept recommends that you do not repeatedly remove and insert the CF.
CAUTION: Never install or remove the CompactFlash
when power is connected to the PLC Server.
CompactFlash
Compartment
Eject Button