User manual

Fitting the Headset
Assembling the Headset
When assembling the headset, do not pull on the
headset or transmitting cables – grasp only the
connectors. If you have trouble assembling the
headset, ask your clinician to help you.
Connecting the transmitting coil
Plug the two-pin connector on the transmitting
cable into the socket in the transmitting coil.
Connecting the microphone cables
1. Hold the microphone case with one hand and
put your thumbnail in the slot on the
microphone cover. Remove the microphone
cover by pulling it away from the microphone
case.
Slot
➤
SPrint User Manual ◆ 21
USING THE SYSTEM
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 21