User manual

Connecting the Headset to the
Speech Processor
1. Turn off the speech processor.
2. Hold the speech processor with one hand and
put your thumbnail in the headset cable cover
release latch. Slide the latch and pull the
headset cable cover back.
3. Plug the large end of the headset cable into the
socket and lay the cable in the groove just
above the socket.
4. Hold the cable in the groove while you click the
cover closed. Ensure that the cable comes
through the hole at the top of the case.
When removing or fitting your cochlear implant
system you may wish to disconnect the headset
from the speech processor. To do this, unplug the
headset cable from the speech processor. Leave the
headset cable plugged into the microphone.
Headset
cable cover
release latch
➤
SPrint User Manual ◆ 23
USING THE SYSTEM
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 23