User manual

Turning on the Speech Processor
Press the On/Off ( ) button to turn on the speech
processor. The speech processor takes about a
second to perform its start-up checks. The LCD
panel then displays the program number and the
listening control settings.
Press the On/Off button again to turn off the
speech processor.
Selecting a Program
Figure 9: The LCD panel
The speech processor can store up to four speech
processing programs at any one time, enabling
your clinician to develop programs for different
listening environments.
The speech processor labels the programs from P1
to P4 and displays the current program number on
the LCD panel.
To change to the next program in the sequence,
press the Program button ( ). If a program is not
installed, the speech processor skips to the next
available program. The speech processor retains the
current program setting until you press the
Program button again, even if you turn off the
speech processor.
Program Number
SPrint User Manual ◆ 27
USING THE SYSTEM
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 27