User manual

SPrint User Manual ◆ 45
USING THE ACCESSORIES
3. Gently pull the cable through the jaws of the
clip to fit in the same slot as the rubber band.
4. Attach the clip to your clothing.
You can move the cable through the clip by
opening the jaws and gently pulling the cable
through its slot. You can then attach the clip to a
convenient place on your clothing.
Securing the Headset Microphone
The microphone lock (mic lock) is used to anchor
the microphone case over the external ear.
1. With the tubing pointing down, hook the two
claws of the mic lock plastic clamp into the
holes on each side of the microphone case.
2. Hook the microphone case over the ear and
pass the tubing under the ear lobe and up to
the ear hook.
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 45