User manual

48 ◆ SPrint User Manual
USING THE ACCESSORIES
Installing your telephone adaptor
Figure 12: Installing the telephone adaptor
1. Unplug the telephone handset cord from the
telephone.
2. Plug the adaptor telephone cord into the
telephone handset socket.The position of the
handset socket depends on the make of the
telephone. It may be located at the rear of the
telephone, on the side of the telephone or
underneath the telephone.
3. Plug the telephone handset cord into the
handset socket of the adaptor.
4. Check the telephone handset is operating
normally by listening for the dial tone. This can
be done by placing the earpiece of the
telephone handset next to your headset
microphone. Otherwise have a hearing person
check this for you.
5. Plug the adaptor output cord into the external
input socket of the SPrint.
6. Set the handset selector switch on the telephone
adaptor to the appropriate position. This can be
Nucleus Telephone Adaptor
To speech processor
Telephone handset
Adaptor
output
cord
Volume control
Telephone
adaptor
Handset selector
switch (hidden)
Handset
socket
Telephone (underneath)
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 48