User manual

SPrint User Manual ◆ 49
USING THE ACCESSORIES
checked by lifting the telephone handset and
listening for the dial tone through your cochlear
implant.
7. Try position 1 first. If this does not work, try
position 2. If neither position works, contact
your clinician.
8. Adjust the volume control on the telephone
adaptor, using a screwdriver to achieve a
suitable volume. Future adjustment should not
be necessary once you have done this.
9. The self-adhesive strip can be used to anchor
the adaptor to any convenient flat surface if
required.
Using your telephone adaptor
Plug the adaptor output cord into the external
input socket of the SPrint. The microphone in your
headset no longer remains on once you connect
your SPrint to the telephone adaptor. Therefore,
you will not perceive any environmental sounds
once you have connected your speech processor to
the telephone adaptor.
When you have completed the call, unplug the
adaptor output cord from your SPrint.
The telephone can be used by a hearing person
while the adaptor is connected.
Caution:
Do not use the telephone during a
thunderstorm as there is a small chance
that the telephone can be a source of
electric shock.
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 49