User manual

SPrint User Manual ◆ 51
USING THE ACCESSORIES
5. If a clear signal is not received, reposition the
telecoil on the handset to improve the clarity.
Using the telecoil in an induction loop environment:
1. Set the microphone sensitivity button on the
SPrint to 0.
2. Plug the telecoil into the external input socket
on the SPrint.
3. Attach the telecoil to your clothing using the
m-clip, so that it is in a vertical position to pick
up the induction field.
4. Increase the microphone sensitivity button to
the desired level (you may need to tilt the
telecoil slightly to obtain the best sound).
Using the telecoil phone positioner
The telecoil phone positioner can be used to hold
the telecoil on or over the earpiece of the telephone
handset. The telecoil can be placed either on the
outside or inside of the earpiece of the handset. In
addition, the telecoil can be placed in a vertical or
horizontal position to obtain the best reception.
Figure 13: Placing the telecoil in the telecoil phone
positioner
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 51