User manual

SPrint User Manual ◆ 55
To connect the TV/Hi-Fi cable:
1. Turn off the speech processor and the external
audio equipment.
2. Plug the cable connector marked ‘COCHLEAR’
into the speech processor external input socket
as shown.
3. Plug the cable connector marked ‘TV1’ into the
output socket on your audio equipment.
4. Turn on the speech processor and select the
appropriate program. Contact your clinician for
advice on which program settings to use with
your audio equipment.
5. Adjust the volume of your audio equipment
using the control knob on the TV/Hi-Fi cable,
near the speech processor.
• On position 1 the volume is very low and few
sounds are picked up from the audio
equipment.
• On position 5 the maximum volume is picked
up from the audio equipment.
6. The microphone in your headset remains on
and you may perceive some environmental
sounds. Adjust the microphone sensitivity to
alter the balance between the environmental
sound and the audio equipment:
• To hear more environmental sound and less
from the audio equipment, press the Up
( ) button.
USING THE ACCESSORIES
Volume control knob
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 55