User manual

58 ◆ SPrint User Manual
Figure 14: Connecting the monitor earphones
To connect the monitor earphones:
1. Leave the SPrint turned on.
2. Align the earphone connector with the
earphone socket and insert the connector. Do
not use excessive force. The sound you hear is
the sound received by the microphone before it
is processed by the speech processor.
3. Adjust the microphone sensitivity and volume
to the desired levels. If the sounds you hear are
distorted, contact your clinician or Cochlear for
advice.
Note:
The monitor earphones are used to
detect an input from the microphone,
not to assess the quality of the signal that
will be heard by the recipients.
USING THE ACCESSORIES
Earphone socket
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 58