User manual

SPrint User Manual ◆ 59
Checking the Transmitting Coil
The signal check can be used to check that the
transmitting coil is sending a signal across the skin
to the implant. It is particularly useful for checking
the transmitting coil and cable of a child’s SPrint.
To use the signal check another person is required.
1. Leave the speech processor on the head and
select the normal program settings.
2. Place the signal check over the transmitting
coil.
3. If the system is functioning, the red light in the
center of the signal check will illuminate.
4. If the red light does not illuminate, perform the
following steps until the problem is identified.
• Change the headset cable. Hold the signal
check over the transmitting coil and speak
into the microphone. If the signal check
light illuminates with incoming sound, then
the original headset cable is faulty.
USING THE ACCESSORIES
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 59