User manual

62 ◆ SPrint User Manual
CARING FOR THE SYSTEM
Keeping the SPrint Speech Processor Dry
If you live in a humid environment, or perspire
heavily, excess moisture may get into the speech
processor or headset. Use the dry pack supplied
with your speech processor to remove excess
moisture. Do not wear any external part of your
SPrint speech processor while bathing or
swimming.
To remove excess moisture from the speech
processor and headset:
1. Remove the batteries from the speech processor.
2. Place the speech processor, headset and dry
pack into the pouch provided.
3. Roll down the top of the pouch provided and
snap it shut.
4. Leave the pouch overnight. The dry pack will
absorb excess moisture in that time.
The effective life of a dry pack depends on the
relative humidity of the environment. To reuse the
dry pack, follow the instructions included with it.
You can also buy a suitable dry pack from a
pharmacy or electronics store.
Caution:
Keep the drying chemical material away
from young children. Swallowing this
material can cause serious internal
injuries.
N02210F ISS4 DO2.qxd 24/4/02 1:12 PM Page 62