User manual

21
※ NOTE: During playing, you can also change preset E.Q using Preset E.Q button. For custom
equalizer setting, press E.Q button of remote control.
[ Preset E.Q. ] [ Custom E.Q ] [ Preset E.Q + Custom E.Q ]
※ NOTE: For more detailed explanation, refer to the 19-7. Preset E.Q. and 19-8. Custom E.Q.
5-3-3. Digital Out
You can set one of five (5) options like OFF, Pass-through, 48Khz, 96Khz and 192Khz
※ Default : 96Khz
5-3-4. Speaker Out
You can set as ON or OFF here.
※ Default : ON
5-3-5. Line Out (Analog Out)
ON or OFF can be set here
※ Default : ON
1) OFF : No signal from Digital Out
2) Pass-through : Original resolution(Frequency)
3) 48Khz : Max 48Khz frequency
4) 96Khz : Max 96Khz frequency
5) 192Khz : Max 192Khz frequency
When you want to use the amplifier of the X30, the
speaker out should be set as ON
In case that you want to use an external amplifier,
the line out (Analog Out) should be set as ON, and
the external amplifier should be connected to the
line out (analog out) at the rear of the X30.
② Select one of 18 options
※ NOTE: Equalizer works in Speaker Out (inside amplifier)
only.