User manual

5-3-10. Slide Show Time

※NOTE: For detailed explanation, refer to 19-3. Photo Slide Show.

5-4. Network

※ Make sure your Ethernet cable or a USB WiFi dongle is connected.

Select Network and press the OK button.

5-4-1. Wired Setup

5-4-1-1. DHCP(Auto IP)

③ Select DHCP(Auto IP) and confirm with the OK button.

There is no need to enter any values.

④ Select OK and confirm with the OK button.

⑤ The screen shots shown on the left will be displayed if the

network is connected successfully.

① Select Network and confirm with the OK button.

② Select Wired Setup or Wireless Setup and confirm it with OK

button.

【 TIP 】 To check network information, press Network Info.

You can set show time and effect time according to your taste.

※ Show time : The time required to show one photo

※ Effect time : The time required to transit one photo to other

photo