User manual

5-9-3. Update by auto (Automatic Firmware Update by network)

※ Default : ON

5-9-4. What’s Automatic Firmware Update by network?

This function is available only when X30 is connected to a network (internet). In the instance that

a higher version of the firmware exists at our server system, your X30 will check it automatically

when the X30 boots up.

※ If OK is selected the X30 will try downloading and extracting it automatically. The X30 will

reboot automatically to update the firmware, see sequence below:

6. CD Database (Music DB)

6-1. What is the CD database (Music DB) of the X30 ?

The Music DB is a database of the music loaded (ripped) to the X30 (onto the storage), you can

edit the CD information of each track such as the title, album, artist, year and genre, that are

stored in the Music DB. You can search any of your music easily by title, album, artist, year or

genre.

When the X30 is connected to the internet/network the CD information can be retrieved from the

※ NOTE: If CANCEL is selected, the folder [New Firmware]

is created automatically in the internal hard disk (or USB),

then the X30 will not ask for a Firmware Update when

booting up. If you delete [New Firmware] through Browser,

it will ask again.

※ NOTE: There is no actual data in the [New Firmware]

folder.

The X30 will automatically update the

firmware through the network. If you don‟t

wish this done automatically you can

change the setting to OFF, see left.