User manual

※ NOTE : You can edit tag information for loaded CDs in Music DB of the X30 easily through

WebInterface.

7-2-2. Ripping Tracks

This procedure is almost the same except you are required to select the track you wish to load

(rip).

7-3. If the FreeDB is installed onto the storage of the X30

If you installed the FreeDB database onto the storage of the X30 via the supplied DVD it will work

as if the X30 is connected to network(internet). The X30 will display the CD information from the

FreeDB database installed onto the storage.

⑥ Enter the info with remote controller or USB keyboard.

You must enter Album name to go to next step.

【 TIP ⑥ 】 To use USB keyboard, ensure to connect a USB

keyboard into the X30 before you boot the unit.

⑦ Select OK to confirm the entry. Then, loading (ripping)

will start as in the picture below.

Now loading (ripping).

⑤ Select one of the 4 file type options and confirm by

pressing the OK button. The below screen will be shown.

⑧ Loading (ripping) has finished. Select OK and confirm by

pressing OK. The screen below will be displayed.

⑨ If you did not enter info for title, artist, year or genre on

the previous step, you can enter all the info here.

⑩ After entering the info, select OK and confirm it by

pressing the OK button.