Installation guide

10
6 Pin
Output
Harness
1
BROWN/BLACK
HORN
OUTPUT (
- )
Locate the vehicle's horn wire.
Verification:
This wire
will
register at positive voltage
and register
ground when the horn switch is pressed.
Connect the BROWN/BLACK wire to the
vehicle's
horn wire. This is a
low
current
output, 200mA.
2
BLUE/BLACK
START STATUS
I
ACTIVE OUTPUT
(
- )
This wire provides a
(-)
200mA
output when the remote start function is activated
and remains
until4
seconds after the remote start
is
shutdown. If
this wire
will
be
used for
multiple application's a
1 amp diode
is
required
in-line
with the stripe facing
the
control module.
3
VIOLET/BLACK AUX 1
This wire provides a
(-)
200mA
output
capable
of
driving relays.
For
Control
of
optional
accessories (i.e. Power Window/Sunroof, etc.).
To
activate refer to the transmitter button configuration chart. Please
refer to
the
selectable options for timing.
4
RED/WHITE TRUNK
RELEASE
OUTPUT (
- )
Locate the
vehicle's
trunk release
wire at the trunk
release
switch.
Verification:
This wire will
register either positive
voltage or ground when
the trunk
release
is
activated.
This is a
low current
200mA
output and
in
configurable
in
option programming.
ca6554 Install
revA