Installation guide

12
3 PURPLE
DOOR
TRIGGER
INPUT
(
+ )
Locate the
vehicle's
dome
light
or
door pin switch wire.
Verification:
This wire
will
register positive
voltage (POS)
when the
door
is
opened and the interior
light
is on. This wire
will
register ground
or
"0" Volts when the door is closed
and the interior
light
is
off.
Connect the PURPLE wire to the
vehicle's positive door input wire(s).
NOTE:
Certain
vehicles
may require
multiple
connections. Refer to
vehicle
application
guide.
4
WHITE/BLUE
EXTERNALSTARTINPUT(-)
This wire
will
activate the Remote
Start
function when a
GROUND
pulse
is
applied
to
it from an
external device.
5 GRAY
HOOD PIN INPUT (
- )
Install
a Hood Pin
Switch
and connect to the GRAY wire. This connection is required
for Remote
Start.
Verification:
This wire when connected
will
register ground when the
vehicle's
hood is opened.
Connect the GRAY wire to the hood pin.
NOTE:
Be sure to loom
the wire, and
seal
the grommet.
6
GRAY/RED
PARKING
BRAKE
INPUT
(-)
Locate the
vehicle's
parking brake wire.
Verification:
This wire
will
register ground when the
vehicle's PARKING
BRAKE is engaged.
NOTE:
The
following connection is required for
Manual
Transmission Mode.
ca6554
Install
revA