Installation guide

Positive Switching Locks
All
Door Lock and Unlock: Locate the lock
I
unlock wire at the
vehicle's
lock
I
unlock
switch.
Verification: These wires
will register
positive voltage when the Lock and
Unlock switches are activated.
Connect the GREEN and BLUE wires shown
in
the diagram below.
Positive Locks:
Vehicle
Door Lock
Control Relays
Reverse Polarity
Locks ( 5-Wire
Door
locks)
GREEN ( - ) Lock
Output
BLUE (
- )
Unlock Output
All
Door Lock and Unlock: Locate the lock
I
unlock wire at the
vehicle's
lock
I
unlock
switch.
Verification: These wires will rest at ground and register positive
voltage when the Lock and Unlock switches are activated.
Connect the GREEN and BLUE or BLUE/GREEN wires shown in the diagram below
using (2)
SPOT
relays (not supplied).
Reverse Polarity Locks:
GREEN ( - ) Lock
Output
Cut
2014
Voxx Electronics
Corporation.
All rights reserved.
17