Installation guide

Adjusting the
Shock Sensor
1.
Increase
sensitivity by turning the adjustment
dial clockwise.
2.
Decrease sensitivity by turning the adjustment dial
counter
clockwise.
Testing the
Shock
Sensor
Arm the system and wait 6 seconds for the zone
to
stabilize,
then
firmly
strike the
vehicles
bumper.
Chirp
Delete
- User Accessible
System ARM/DISARM chirps can
be
toggled
ON
or
OFF
without entering the
programming feature banks.
1.
Turn the ignition
ON
then
OFF.
2.
Press and
release
the valet/programming button 3 times. The system
will
respond with 1 chirp for
ON
or 2 chirps for
OFF.
Dome Light
Delay
I
Theater Dimming
The system can
be
programed to delay
arming after the
lock
button is pressed
(60
second max) for
vehicles
with a
dome
light delay
or theater dimming feature.
Once
programed the system will 'learn'
the timing of the dome
light delay
and add 2
seconds before arming.
1.
Close all
doors with ignition off.
2.
Using the transmitter press
LOCK, UNLOCK, LOCK ,UNLOCK, LOCK,
UNLOCK, LOCK. The LED
will light solid
to indicate the system has
entered
DOME
DELAY LEARN
MODE.
3.
Immediately OPEN
then CLOSE
the door
WITHOUT disarming the
system. The system will
then monitor the door trigger wire.
Once the
dome
light
turns off, the system
will
then add 2 seconds and then exit
the learning
mode.
4.
The LED
will
begin to flash
indicating the system has exited the
learning mode and
is
now armed.
26
ca6554
Install
revA