Installation guide

Arming
the Security System
To
arm the system, exit the vehicle, close
all
doors, then press the
@
button. The
parking lights will
flash 2 times, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator
will blink steadily, once per second.
NOTE:
The system is equipped with a feature
called Silent
Choice.
If
enabled, the
system requires a second press
of
the
@
button to activate an audible arming
response from the vehicle.
Passive
Arming
Bypass
If
passive arming is enabled on your system, while the system is disarmed, press
r£
+
c:J>))
,
the system
will respond with 1 chirp and the LED
will
turn on. The security
system
will remain
in
this temporally bypassed state for as long as you wish.
To
exit
passive bypass, press the
@
or
r£
button and the system
will
return to normal status.
Bypassing
The
Shock
Sensor
To
arm the system and ignore the shock sensor press
@
button, then within 5
seconds press
@
+
c:J>))
,
the system
will
respond with 1 long chirp.
NOTE: The system will
only change the shock sensor setting for one arm cycle and
will be defaulted back to normal operation the next time the system is armed.
Hidden
Alarm
Function
Press the
c:J>))
button first, within 3 seconds press the
@
button to activate the hidden
alarm function. The security system
will
arm with "Hidden
Alarm Function" in which the
siren
I
horn
will be silenced
if
the system is triggered.
Disarming the Security System
To
disarm the system press the
r£
button. The parking lights
will flash 1 time,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE:
The system is equipped with a feature
called Silent
Choice.
If
enabled, the
system requires a second press
of
the
r£
button to activate an audible disarming
response from the vehicle.
If
your system is set up for 2 step unlock, a third press
of
unlock
will
activate the audible response.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 2 seconds.
2014
Voxx Electronics Corporation. All rights reserved.
3