Installation guide

8
Remote Starting
Your Vehicle
To
activate the remote vehicle start function, press and release the
0
button 2 times
within 2 seconds. The system will sound, the parking lights will flash 1 time and the
system will check the vehicle to ensure it is safe to start.
If all safety parameters are
correct, the vehicle will start within 5 seconds. The vehicle's parking lights will turn on
(or flash depending on system settings) as a visual indication that the vehicle has
started and is running.
If your vehicle stalls
or
does not start, the system will pause
5 seconds, then try
2 more times to start the vehicle
(a
total
of
3 attempts). The system will pause
5 seconds between each start attempt.
If
the vehicle does
not
start after the 3rd
attempt, the system will abort the remote vehicle start process.
Remote Start
Shutdown
Press and hold the
0
button for 3 seconds to turn the vehicle off.
Entering the Vehicle while
it
is
Running via Remote Vehicle
Start
1.
Unlock the vehicle's doors.
2.
Enter the vehicle. DO NOT PRESS
THE BRAKE PEDAL!
3.
Insert
the key into the ignition switch and turn to the
ON
or
RUN
position.
4. Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.
Preheating
or
Precooling
the Vehicle's
interior
Before exiting the vehicle, set the temperature controls to
the
desired setting and
operation. After the system starts the vehicle, the heater
or
air
conditioner
will
activate and heat
or
cool the vehicle's interior to your setting.
ca6554 Owners revA