Installation guide

10
To
begin the 2
I
3
hour
start
up
timer
mode:
1.
Turn the vehicle's ignition
ON
then
OFF.
2.
Press and
hold
the
valet button.
3.
Press the
0
button 4 times, the system will;
a.
When set for 3 Hour (default)- chirp 2 times
and
flash the
parking lights 4 times.
b.
When set for 2
Hour-
chirp 1 time
and
flash the parking
lights 2 times.
4.
Release the valet button.
To
exit
the 2
I
3
hour
start
up
timer
mode:
1.
Turn
the vehicle's
Ignition
ON.
OR
1.
Activate the remote vehicle start feature using the remote
control.
Turbo Timer
This option
will keep the engine running
to
allow the vehicle's turbo to properly cool
down before shutting the engine
off.
To
engage the Turbo Timer feature:
1.
With the vehicle running via the ignition key
and
your foot off of the
brake
pedal.
2.
Engage the vehicle's parking brake
and
press the
~
and 0
buttons simultaneously.
3.
The vehicle's parking lights will
turn
on
to
verify the Turbo Timer
feature has been activated.
4.
Turn the ignition key
OFF,
the vehicle
will
continue to
run
until
the pre-
programmed time has
elapsed
(1,
3,
or 5 minutes)
To
disengage
the
turbo
timer
feature, press the
vehicle's
brake
pedal.
ca6554
Owners
revA