Installation guide

Operating the Daily Start Timer
The system has the
ability
to start your
vehicle
based
on
a 24-hour countdown timer.
This feature requires a two-part activation sequence. From the remote,
while
in
range
of
the vehicle,
pressing both the
@
&
0
buttons together
will activate the 24 hour
countdown timer (the
vehicle will
start 24 hours from this time). Next, When you are
finished operating the
vehicle
for the day, perform the
following
steps to
complete
the
process.
1.
Turn the ignition
ON/OFF (vehicle
must be disarmed).
2.
Within
10
seconds, while pressing the brake, press and
release
the
0
button twice.
3.
The
vehicle will emit 2 chirps and flash the parking
lights
4 times.
Temperature Start Mode
The system has the ability to start the
vehicle
if the temperature drops
below
a preset
temperature
threshold.
Once activated, the system
will only start the
vehicle
one time
based on the temperature setting and
will
be
cancelled
if the
vehicle is started with the
key or remote started by the transmitter. Temperature is read from the
module, located
below
the dashboard
in
most instances, and the
vehicle's
interior temperature may
vary from the ambient temperature.
1.
The
vehicle
must be armed.
2.
Press and
release
both the
~
&
0
buttons together.
3.
The
vehicle will
emit 1 chirp and flash the parking
lights
1 time.
Note: This feature is
defaulted OFF
and must be set
in
option programming.
Remote Start Safety Features
For safety and security reasons, the system will
shutdown or prevent the remote
vehicle
starter from activating if any
of
the following
occur:
1.
The
vehicle
hood is open.
2.
The brake
pedal
is pressed prior to turning the ignition key to the
ON
position.
3.
The engine is over-rewed (tach checking
only).
4.
Valet
mode is active.
2014
Voxx
Electronics
Corporation.
All
rights reserved.
11