Technical data

Accessories
312185S 27
Valve Accessories
551351 Short Throw Spacer
A spacer under the air piston that limits how far the fluid
needles push open. It reduces the amount of material
surge when the valve opens, and reduces the amount of
snuff-back available. Used for dispensing low flow small
diameter beads. For 255180 and 255182 only.
123660 Extension Cable, 6.0 m (19.7 ft)
For locating the valve further from the base system than
allowed with the original cable provided. For use with the
electric handle 255208 and actuated lever 255249.
Conversion Kits
Part No. Description Notes
255206 Pneumatic Handle Convert any valve to a hand held valve with an internal
pneumatic 4-way valve. See page 21.
255208 Electric Handle Convert any valve to a hand held valve with an internal nor-
mally open switch. See page 20.
255249 Electric Lever Switch Convert any valve to a hanging valve with an internal nor-
mally open switch. See page 22.
255273 Hanger Adapter Add to any hand held valve to allow it to be hung.
123902 Cable Replaces trigger cable included with electric handle 255208
and actuated lever 255249. For converting handle/lever to
connect to systems previously connected to a TwinMixer
®
gun. Use pins 1 (brown) and 3 (blue).
Hanger Adapter
255273
TI10512A