Technical data

Features
6 312185S
Features
FIG. 2: Features of the MD2 Valves
Note: The Trigger/Lever activates an electrical switch in
the handle, which activates a remote 4 way solenoid
valve. Bring an “OPEN” air signal to the 1/8 in. npt(f)
port (I) on this side of the valve, and a “CLOSE” signal
to the port (O). See Accessories, page 23, to order fit-
tings and tubing.
Normally open momentary contact switch
The 1/8 in. npt (f) port (I) can be used to send an “ON”
signal back to a pump pilot or control. See F
IG. 1.
Pneumatic Valve
Electric Actuated Lever Valve
Electric Switch Valve
TI10409A
TI10407A
TI10383A
1/4 in npt (f)
air inlet
Series A handle shown