User`s manual

x
Preface
Reorient the receiving antenna.
Relocate the imager with respect to the receiver.
Move the imager away from the receiver.
If necessary, you should consult your sales representative or an
experienced radio/television technician for additional suggestions.
You may find the following booklet prepared by the
Federal
Communications Commission helpful:
How to Identify and
Resolve Radio-TV Interference Problems
. This booklet is available
from the U.S. Government Printing Office, Washington, D.C. 20402,
Stock No. 004-000-00345-4.
EP-1000 Warnings
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
this imager.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THIS APPARATUS MUST BE EARTHED.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
IMAGER TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN