User`s manual

xii Preface
EP-1000 Precautions
Never Insert Any Foreign Object into the Imager
Foreign objects of any kind inserted into this imager constitute a
safety hazard and can cause extensive damage. The imager will not
print on materials not specifically designed for it. Feeding standard
office overhead transparency material into the imager will not work
and can damage the print mechanism.
Protect Against Dew Formation
In extremely cold regions, if the imager is moved quickly from an
extremely cold place to a warmer one, dew is likely to form. If dew
has formed, printing is not possible.
Operating Temperature and Humidity Ranges
The imager’s operating intake air temperature range is 59–86°F
(15–30°C), and the operating humidity range is 30–85%
noncondensing.
Unsuitable Locations
Do not place imager in high humidity or high dust areas. Airborne
dirt particles can cause image quality problems. Avoid placing the
imager in areas where ventilation ducts, open doors, or frequent
passers-by might expose the imager and media to high levels of
debris.
Avoid hot-springs areas where hydrogen sulfide and acidic ions are
likely to be generated. Avoid places where imager is likely to
contact oily fumes and vapors. Avoid direct sunlight.