User`s manual

EP -1000 Instant Dry Imager User’s Manual xvii
Preface
Print Technology: Dye Sublimation.
Spatial Resolution: 314 dpi (12.36 pixels/mm).
Color Resolution: 16.7 million colors. 256 levels each of
cyan, magenta, and yellow.
Density Range: Up to 2.55 OD Dmax.
Color Registration: Less than 0.1 mm average.
Interfaces: Centronics-type 36-pin connector
(IEEE 1284) and USB 1.1.
Compatibility: Drivers available for Windows 2000
and XP.
Image Correction: Gamma, contrast, and Medical Color
Matching™ (MCM™) selectable in drivers.
Memory: 23 MB RAM memory, three image planes
of 2508 x 3134 pixels.
Cassettes: One dual A or A4 media cassette included
with imager, 50-sheet capacity.
Media Sizes: A or A4 ChromaVista
®
paper. CMY Donor
ribbon.
Power: 120 V~, 50/60 Hz; 2.7 A/210 W (printing),
0.35 A/21 W (idle), 30-130 W (head
preheating)
Dimensions and Weight: Height:10.75 in. (27.2 cm).
Width:17.0 in. (43.3 cm).
Depth:28.5 in. (72.0 cm).
Weight:28.7 lbs (13 kg).
Regulatory: US FDA 510(k), UL, FCC.
Environment: Operating
Temperature: 63–86°F (17–30°C)
Storage: -8–123°F
(-22.2–51.6°C)
Operating
Humidity: 30-80% R.H.
Use Environment: The imager must be located at least
1.83 m (6 ft) from the patient treatment or
examination area (bed, exam table, etc.) at
all times to avoid inadvertent patient
contact with the apparatus.
EP-1000 Series Specifications
USB port
Parallel port
Imager and Cassette
Back Panel
n
e
t
w
o
r
k
U
S
B
p
a
r
a
l
l
e
l
I
N
T
E
R
F
A
C
E
P
R
I
N
T
O
NLI
N
E
m
e
d
i
a
fa
ul
t
po
w
e
r
Power cordConnectors