User`s manual

-1

000 Instant Dry Imager User’s Manual

2-1

Setting Up the EP-1000

This section explains how to set up the EP-1000. The steps are:

1. Finding an appropriate location for the EP-1000

2. Unpacking the EP-1000

3. Loading the ribbon cartridge

4. Connecting the imager cable

5. Connecting the power cord and powering on the EP-1000

6. Loading paper

7. Installing the dust covers

8. Making a test print

The software for the EP-1000, which enables you to take full

advantage of the EP-1000’s capabilities, is on the CD-ROM that ships

with the EP-1000. After you set up the EP-1000, you should install

the appropriate print driver.

Special drivers may be provided to interface to certain OEM

equipment. Contact your Codonics sales representative or Codonics

Technical Support.