User`s manual

EP -1000 Instant Dry Imager User’s Manual 2-3
Setting Up the EP-1000
1. Open the shipping carton.
2. Carefully remove the top foam with the accessories.
3. Lift the imager out of the carton.
4. Remove the EP-1000 from the plastic sheet, and place the
EP-1000 at the desired location.
NOTE: Save the packaging in case you need to ship the EP-1000.
5. Remove the shipping inserts on the paper tray inserting slot.
Unpacking the EP-1000
8
To unpack the
Imager
3
POWER
POWER
Pull the shipping insert
to the center
Hold the tab