User`s manual

EP -1000 Instant Dry Imager User’s Manual 2-7
Setting Up the EP-1000
3. Remove the old ribbon from the ribbon carrier.
NOTE: Do not discard the ribbon carrier.
4. Remove the new ribbon from its packaging.
5. Set the new ribbon on the ribbon carrier as shown below.
CAUTION Images remain on the ribbon after printing. If you are working with
confidential documents, you may need to consider alternate ways of disposing of the
ribbon to maintain security.
CAUTION Touching the dye patches could contaminate the ribbon, resulting in
scratches or artifacts on your prints.
3
Ribbon
Handle
Ribbon carrier
Spool