User`s manual

2-10 Introduction
1. Make sure that your computer is turned off.
2. Connect and secure the USB cable to the USB port.
3. Connect the power cord.
4. Press the Power button to power on the EP-1000.
5. Press the Online button to set the EP-1000 to offline mode.
6. Press the
Interface button so that the USB light flashes.
7. Press the
Online button to set the EP-1000 to online mode.
The USB light comes on steady (stops flashing).
Connecting a USB Cable
8
To connect a
USB cable
Power cord
connector
USB
port