User`s manual

3-2 Operating the EP -1000
Table 3-1 and Table 3-2 describe the functions of the indicator
lights and control buttons.
Table 3-1. Display Panel Indicator Lights
Indicator Light Description
Power Lights green when the EP-1000 is turned on.
Fault Lights red when a fault occurs. The light remains on until all the
faults are resolved.
When the Fault light comes on steadily, you may be able to
correct the problem yourself.
Media Lights red when a fault concerning print paper occurs.
Parallel Lights green when the Parallel port is selected.
USB Lights green when the USB port is selected.
Table 3-2. Display Panel Control Buttons
Button Description
Power Press to turn the power on or off. When power is on, the Power
light comes on.
Online Press to toggle the imager online and offline. In online mode,
you can control the EP-1000 through the computer.
Print Press to reprint a valid job that is still in the image buffer. This
button is not available when image data has not been sent or
the EP-1000 is online.
Interface Press to select either the Parallel or USB port. The indicator
light for the selected interface flashes. This button is disabled
when the EP-1000 is online.
Open Press to open the top cover. You will need to open the top
cover when loading the ink ribbon or clearing a paper jam.
CAUTION Do not open the top cover during printing. Doing so may cause print faults
or damage the EP-1000.