User manual

Calibration and Warranty
77
Product
Shipping
Instructions
To prepare the product for shipping to Coherent:
1. Contact Coherent Customer Service (refer to
Table 3 on page 76) for a Return Material Authori-
zation number.
2. Attach a tag to the product that includes the name
and address of the owner, the person to contact, the
serial number, and the RMA number you received
from Coherent Customer Service.
3. Wrap the product with polyethylene sheeting or
equivalent material.
4. If the original packing material and carton are not
available, obtain a corrugated cardboard shipping
carton with inside dimensions that are at least 6 in
(15 cm) taller, wider, and deeper than the product.
The shipping carton must be constructed of card-
board with a minimum of 375 lb (170 kg) test
strength. Cushion the instrument in the shipping
carton with packing material or urethane foam on
all sides between the carton and the product. Allow
3 in (7.5 cm) on all sides, top, and bottom.
5. Seat the shipping carton with shipping tape or an
industrial stapler.
6. Ship the product to:
Coherent, Inc.
7470 SW Bridgeport Rd.
Portland, OR 97224
Attn: RMA # (add the RMA number you received
from Coherent Customer Service)