Use and Care Manual

ManualsBrandsColeman ManualsBattery GeneratorsVoyager Go 500-Watt Battery Generator with Solar Capability

Product Details

Intelligent LCD Screen

Quick Start Guide

Connect to AC outlet,

solar panel, or both to

fully charge unit:

Turn on outputs

(USB, AC, and 12V ports)

and connect device(s):

For more detail, refer to “Power Save Off ”

Mode section in this manual.

USB

AC/UPS

12V

PRESS

ONCE

USE THIS MODE

FOR

CPAP

AND OTHER

LOW-DRAW

APPLIANCES

AC/UPS

USB 12V

DISPLAY

2.4 A

3.0 A

SECONDS

PRESS / HOLD

Activating “Power Save Off”

Mode:

RED

EXT BATT SOLAR INPUT

AC INPUT

RED

SOLAR INPUT

AC INPUT

A. Intelligent LCD screen: See details at right

B. USB power button and ports

C. AC power button and outlets

D. 12V power button and accessory socket

120V AC

USB 12V

DISPLAY

E F

E. AC input port: Use AC charging cord

(included)

F. Solar charge controller

G. AC charge cord

B. Fuel Gauge Indicators

• Percentage of available battery power

• Battery graph fuel gauge

C. Power Output (Usage) Indicators

• Total output wattage

• Time remaining to empty at

current output

D. Warning Indicators

• HI TEMP/LO TEMP

• OUTPUT OVERLOAD

• LOW BATTERY

A. Charging Input Indicators

• Time to fully charge (hours to full)

• AC or solar charge detected

• Input wattage

2.4 A

3.0 A

SOLAR INPUT

88:88

HILO TEMP OUTPUT OVERLOAD LOW BATTERY

HOURS

TO FULL

888%

888888

WATTS WATTS

88:88

HOURS

TO EMPTY

A B C

RED

Getting Started: Charging your Battery Generator

IMPORTANT: your Battery Generator should be placed in a dry, well ventilated area with at least 6 inches of space on all sides for proper ventilation.

BEFORE YOU START: See “Safety Information” section for important precautions. The user should conform to all safety precautions in the guide. Keep this guide in a safe place for future reference.

IMPORTANT - CHARGE BEFORE USE: Fully charge your Battery Generator before using it and/or storing it. Keep the unit plugged in when not in use

so it is ready when you need it. The charger is designed to maintain the battery in a healthy state.

Your Battery Generator can be charged from grid power (AC) or solar energy (solar panels).

• When it is being charged and discharged (used to power your items) at the same time:

• If the input power (charging your Battery Generator) is greater than the output power (used to power your items), the intelligent LCD screen will show the “Hours to Full”.

• If the input power (charging your Battery Generator) is less than the output power (used to power your items), the intelligent LCD screen will show the “Hours to Empty”.

• The LCD screen stays on during charging but it can be turned off by pressing the DISPLAY button below the screen.

If your Battery Generator is fully discharged (0% available power), the intelligent LCD screen will be completely dark. This screen will illuminate as soon as your Battery Generator is connected to power, letting you

know that the unit is charging, and will continually display the growing power status as your Battery Generator charges.

MANUALS

EN ESPAÑOL / ET FRANÇAIS

ColemanPowerStations.com

Battery Generator

™

500

Portable Power Station User Guide

Summary of content (6 pages)

PAGE 1
MANUALS EN ESPAÑOL / ET FRANÇAIS ColemanPowerStations.com Battery Generator™ 500 Portable Power Station User Guide Product Details B USB A 12V 2.4 A Intelligent LCD Screen E D F A G SOLAR INPUT 3.0 A DISPLAY D 120V AC C E. AC input port: Use AC charging cord (included) F. Solar charge controller G. AC charge cord A. Intelligent LCD screen: See details at right B. USB power button and ports C. AC power button and outlets D.
PAGE 2
Getting Started (cont’d) Charging your Battery Generator from an AC outlet Estimated Charge Time: 7 hours to full NOTE: The internal 80W charger can deliver a net charge of up to 70W to the battery, so the maximum charging wattage that will show on the intelligent LCD screen is “70W” (this is normal). NOTE: The 7 hour charge time may vary depending on your AC outlet power and the climate (Battery Generator may charge more slowly in very high or low temperatures).
PAGE 3
Getting Started (cont’d) Using your Battery Generator Each output type (USB, AC, DC) has a separate power button with an indicator light to show that it is on. When any port is on the intelligent LCD screen will also turn on. You can turn off the intelligent LCD screen at any time by pressing the DISPLAY button below the screen. 1 2 Connecting Multiple Items USB WATTS USB 2.4 A 2.4 A 2.4 A 3.0 A Plug your item(s) into your Battery 120V AC Generator and press the button to activate the outlets.
PAGE 4
Reference Product Specifications Battery Operating Temperatures Chemistry Li-Ion Charging 0° — 45° C / 32° — 113° F Capacity 11.07V, 478 Wh Discharging (in use) -10° — 45° C / 14° — 113° F Input Certifications AC Input 120V AC, 60Hz, 80 Watt Safety ANSI/CAN/UL2743 Solar Input MPPT, 13-30 V Max, 17 A, 200W Max Efficiency CEC/NRcan/DOE EMI FCC Part 15 AC Outlet Number of outlets 3 Dimensions and Weight AC Output 120 VAC, 60Hz, Pure Sine Wave Dimensions (LxWxH) 27.0 x 22.7 x 20.
PAGE 5
Reference (cont’d) Troubleshooting Guide Your Battery Generator features several built-in protection features to ensure safe and efficient operation. Below is a guide which shows the typical faults that occur during normal operation and how to correct them and resume use. If a fault occurs, the following warning(s) will appear on the intelligent LCD screen. Please refer to the table below to safely correct any problems and allow your Battery Generator to reset and resume operation.
PAGE 6
Support And Warranty FCC / ISED Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.