Use and Care Manual
In order to keep your Battery Generator operating efficiently, periodically clean and maintain your unit using the simple steps below.
Maintenance
• Clean the surface of the Battery Generator when necessary. Always use a soft sponge or cloth for
cleaning. A mild, non-abrasive cleaning detergent may be used to remove stubborn dirt.
• Avoid using your Battery Generator in dirty conditions where foreign matter such as dust, dirt and
moisture can clog the AC and USB outlets and charging ports. Keep the Battery Generator in a
well-ventilated area away from direct exposure to outside elements whenever possible.
• Do not attempt to insert anything into the Battery Generator’s openings to clean them, as this may
result in injury or damage to the Battery Generator and void the warranty.
• Do not attempt to repair the Battery Generator yourself, as this may result in injury or damage to the
Battery Generator and void the warranty.
Reference (cont’d)
This section contains important safety information. Before using the product, READ ALL instructions and cautionary markings on or provided with the product, and all appropriate sections of this guide. The product contains no
user-serviceable parts. SAVE THESE INSTRUCTIONS.
Safety Information
WARNING: NO USER SERVICEABLE PARTS
• There are no user serviceable parts in this unit, DO NOT attempt to open the Battery Generator; this is
dangerous and will void the warranty.
WARNING: HEAT GENERATION DURING CHARGING AND USE
• Charging and discharging generates heat and requires proper air flow. Use in a ventilated area and
ensure adequate clearance for the ventilation grills. Blocking the grills may cause overheating and
damage to the unit.
WARNING: RISK OF ELECTRIC SHOCK INJURY
• Do not operate or store in moist conditions to avoid electric shock.
• If the unit gets wet wait for it to dry completely before using it.
• Do not insert foreign objects into any of the ports or openings.
WARNING: RISK OF ELECTRIC SHOCK OR FIRE HAZARD
• Review the specifications of the Battery Generator ports and all connected devices you intend to use.
• The output ports can generate dangerous voltages.
• Do not use the Battery Generator if it is damaged or any of the input or output cords are damaged.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
WARNING – When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose Battery Generator to rain or snow.
e) Use of an attachment not recommended or sold by Battery Generator manufacturer may result in a risk of fire,
electric shock, or injury to persons.
f) To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the
Battery Generator.
g) Do not use the Battery Generator or appliance that is damaged or modified. A damaged or modified
Battery Generator may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
h) Do not operate the Battery Generator with a damaged cord or plug, or a damaged output cable.
i) Do not disassemble the Battery Generator, take it to a qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire or electric shock.
j) To reduce the risk of electric shock, unplug the Battery Generator from the outlet before attempting any
instructed servicing.
PERSONAL PRECAUTIONS
a) When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
b) Do not expose a Battery Generator to fire or excessive temperature. Exposure to fire or temperature above 130°C /
266°F may cause explosion.
Your Battery Generator features several built-in protection features to ensure safe and efficient operation. Below is a guide which shows the typical faults that occur during normal operation and how to correct them and resume use.
If a fault occurs, the following warning(s) will appear on the intelligent LCD screen. Please refer to the table below to safely correct any problems and allow your Battery Generator to reset and resume operation. If you have additional
questions, please contact Customer Service at 888-617-5884.
Troubleshooting Guide
Fault Type What it means What to do
HI TEMP / LO TEMP Your Battery Generator is too hot or too cold (operating temperature range is -10° to 45° C / 14° to 113° F) Move the Battery Generator to a cooler or warmer location as needed
OUTPUT OVERLOAD Excessive power draw Remove some of the connected items to lower the total draw on the Battery Generator, then turn it on again.
LOW BATTERY Low battery voltage (<9V) Charge the Battery Generator
Flashing icon Solar Input range exceeded (See Product Specifications) Check solar panel configuration
Shuts down after 5 hours Shuts down to save battery charge when it detects low power need Press and hold power button to go into Power Safe Off mode, LED flashes in this mode.
Turning port off cancels the Power Save Off mode.