Instruction Manual

26
There are 3 different types to connect internet, please select an appropriate type to fit your network
environment.
1. STATIC (FIXED) IP: Input IP address, subnet mask, gateway and DNS server manually.
2. DHCP : Check the "Obtain IP address automatically", the device will acquire IP address, subnet mask,
gateway and DNS service.
3. PPPOE : input the user name and password from ISP provider.
No matter which type you use, please click “Test” before you click “Apply” to make the setting work.
Definitions and descriptions of network configuration:
Parameter Meaning
HTTP port The port number of accessing IE browser. The default
port is 80
Server port The port number of data. The default port is 6036
Static IP
IP address The IP address of the server
Subnet mask The subnet mask of the server
Gateway The gateway of the server
DNS server The address of DNS server
PPPOE
User name User name of broad band dial-up
Password Password of broad band dial-up
DDNS server
DDNS server Website provided by dynamic domain name supplier. The
optional: www.meibu.com，www.dyndns.com
User name User name for log in the website of domain name
supplier
Password Password for log in the website of domain name supplier
3.6.2 Network stream
Step1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-32:
8CH
Fig 4-32 network configuration-sub stream
Step2: select fps, resolution, quality, encode and max bit rate
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button
to exit current interface.
Definitions and descriptions of network stream: