ENJOY THE SMART LIFE ENJOY THE SMART LIFE VOL + VISTO/C KIT PAIR - Passion.Technology. Design.
Table of contents Warnings........................................................................................... 3 Visto/C Kit......................................................................................... 4 Visto................................................................................................... 5 Description................................................................................................5 Technical characteristics...............................................
Warnings • This Comelit product was designed for use in the creation of audio and video communication systems in residential, commercial or industrial settings and in public buildings or buildings used by the public. • Disconnect the power supply before carrying out any operations on the wiring. Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
Visto/C Kit With VISTO/C Kit you can control your video entry system both locally and remotely. With the Comelit Visto app, available on App Store and Google Play, you can answer calls from an external unit, view images from the camera on the external unit, images from additional remote cameras and operate the locks of doors and gates. In addition, thanks to the integral motion detector function, you can receive on your smartphone notification of any movement/presence detected around your front door.
Visto Description m 7m 4 ") ") ") 85 85 (1, (1, m mm m 47 47 85 (1, 28 28 28 mm m mm (1, (1,m 10 10 10 ") ") ") 4 (1, 1 6 137 mm (5,39") 3 137 mm (5,39") 2 137 mm (5,39") 5 9 1 7 8 1. Surface mount by means of screws 2. Cable inlet hole 3. Connection terminal 10 + - Visto Power supply NO Normally open relay contact COM Common relay contact 4. Brightness sensor 5. Wide-angle color camera 6. Microphone 7. Call button / Indicator LED 8. Loudspeaker 9.
Technical characteristics MAIN SPECIFICATIONS Type Type of finish Monoblock entrance panel Plastic Audio/video system ü Wall-mounted ü Camera Diagonal viewing angle (°) Video encoding Type of sensor Colors 170 H.264 1/4" CMOS Minimum colour illumination (lux) 2 Minimum B/W illumination (lux - led IR ON) 0 Lens size (mm) 1,6 Signaling LED ü Buttons to call ü Total buttons 1 Operating temperature (°K) RH max operating humidity (%) IP protection rating 248.15 - 328.
Installation Warning It is advisable to install VISTO near the Wi-Fi router. Always check the quality of the Wi-Fi signal before final installation of the product. A too low Wi-Fi signal will impair operation of VISTO.
LED guide Start Door opening Wi-Fi search Wi-Fi not available Loss of Wi-Fi connection Connected to Wi-Fi Not connected to the server Standby mode Call in progress Conversation in progress Updating in progress WARNING: this update can take up to 10 minutes, DO NOT remove the power during this process.
Art. 3532 Description 2 VOL PAIR 3 VOL PAIR 116 mm (4,57") 1 56 mm (2,20") 33 mm (1,30") 116 mm (4,57") VOL selection Melody 56 mm PAIR 33 mm (2,20") VOL PAIR Volume adjustment PAIR Devices association (1,30") 1. Loudspeaker 2. Possibility of wall fixing 3. Battery housing AA 1,5V (Not included) Art. 3532 supports 433.
Press the call button while pressing and holding the PAIR button on Visto doorbell. Pairing is confirmed by the ringtone.
Art. 3534 Description Power supply unit Input voltage 100-240V AC Output voltage 24 V DC Max. current delivered 0,4A Europe 2. UK PUSH PUSH 1. USA + - Power supply Maximum connection distance For Wi-Fi signal see page 6 “Installation warning”. A max. UTP5 cat.
Wiring diagrams 3534 3532 433MHz + - + - NO INTERNET C ROUTER VISTO Variant for electric lock connection 3534 110/220V 12-24V AC/DC + VISTO 12 - NO C max 1A APP
Installing the COMELIT VISTO app After downloading the COMELIT VISTO app from the store onto your smartphone, you can use the app to connect the VISTO to your router via Wi-Fi. If your router is connected to the internet then your Smartphone will receive a push notification for motion detection notification and can communicate between the VISTO and your smartphone. These tips will help during the installation of your brand new Visto. Getting started with VISTO Wi-Fi Doorbell and app 1.
We recommend to change the device password once installed for maximum Security 1. 2. Device name 3. If you are using the door strike feature, we recommend that you set a unlock password (default 888888). Otherwise activate the “one key” unlock feature.
The Master user can invite an unlimited number of Slave users using the My Share button in the settings menu. 1. 2. ATTENTION! Visto Wi-Fi needs to be upadted to the latest firmware version. In the Visto Comelit app, a red dot on the symbol, at the top right, indicates the availability of updates and useful information for the proper functioning of the device. Once your device is connected to the network, it is highly recommended to update it. 3. 1. 4. 2.
Thank you for purchasing Visto by Comelit ! 16
1ª ed - 1rev. 04/2018 cod. 2G40002191 CERTIFIED MANAGEMENT SYSTEMS Passion.Technology. Design. w w w.comelitgroup.