Use and Care Manual

Page 10
3. Lift the top and remove the 2 screws and the hinge from the right side.
4. Gently lift the door away from the hinge pin and remove the door. Re-insert
the 2 screws and hinge on the opposite side.
5. Remove the adjustable leveling leg from the bottom left of the unit.
6. Remove the leg and then the 4 screws from the bottom hinge bracket on the
right of the unit. Remove the hinge pin, nut and washer from the bottom right
of the unit.
7. Turn over the bottom hinge bracket so the at edge is facing the outer left
side of the unit. Reinstall the pin, nut and washer into the bracket. Re-Insert the
leg in the front hole of the bracket.
SET UP & USE